We test your solar modules
Mobile flash tests for your modules
Sichern Sie sich jetzt kurzfristig ihren Termin
Maximise the performance of your solar system with our flash test Flash-test. Our team will come directly to you and carry out the tests on site. Uncover potential problems and possible defects, optimise your energy production and protect your investment. Get a quote and make an appointment today to have your solar panels inspected.
Our flash test: mobile, straightforward, and valid.
Why test solar modules?
A flash test, also known as a sun simulator test, is used to measure the performance of solar photovoltaic modules. This is done by using a flash that simulates the effect of sunlight on the module, and the electrical output signal of the module in response to this light is measured. These tests are usually carried out at manufacturers to ensure that modules meet certain performance standards and can also be used to assess the condition of existing modules. Flash tests can provide valuable information about the performance and reliability of solar modules.
We are your partner for uncomplicated and mobile flash tests directly on site.
Ensure optimum efficiency
Use advanced technology to check performance and ensure reliable power generation!
When do you test solar modules?
A flash test is a standardised test procedure for determining the rated output of solar modules and solar cells. The solar cells are exposed to a flash of light. The light is only applied for a few milliseconds and with an intensity of 1,000 W / m². The test should be carried out to determine the nominal output of solar modules and solar cells.
Have you purchased new modules and would like to check the manufacturer's performance data?
Or do you operate a solar park and want to check the performance of the modules?
Whether it's a new installation or a quality check - our mobile Flash tests are always worthwhile.
Quality control
We rely on the power of the sun and invest in solar modules. This innovative energy source supports sustainable business operations, enables cost savings and promotes the sustainable image of your company. It also offers attractive tax advantages. The long-term profitability of this investment is obvious. However, caution is advised when purchasing solar modules. The quality assurance of many manufacturers is still inadequate. Damage caused by improper transport and storage, faulty batches, manufacturing defects, assembly damage or storm damage is becoming increasingly common. Many defects that affect the service life of a solar module and thus significantly influence the quality of your solar power system cannot be recognised with the naked eye. It is therefore reassuring to have certainty about the quality, functionality and profitability of your solar modules. Distact Energy offers you this reassurance through fast, reliable and objective mobile inspections of your solar modules.
Distact Energy checks the quality of your solar modules in their entirety or on the basis of random samples at any desired location. Within one day you will have clarity about the quality and profitability of your modules - now and in the future!
“We commissioned Distact Energy to carry out flash tests at one of our solar parks and were impressed by their uncomplicated and efficient approach.
The measurement results could be accessed and analyzed directly.
We look forward to continuing our collaboration.”
Matthias Franke
Senior Project Developer
The XXL flasher

Flashes up to a module size of 2750 mm
Our flasher is designed for use directly in the field. The system offers an A+A+A+ LED sun simulator Ed. 3 for power and IV curve measurement and a high-resolution electroluminescence inspection in one. Integrated into our flash transporter, we can carry out many important measurements directly on site. With our flasher, we can reliably find underperforming modules and hidden defects (microcracks, inactive areas).
Minimum panel size (w x l in mm):
800 x 890 mm
Maximum panel size (w x l in mm):
1400 x 2750 mm
Panel types
Framed and frameless glass-glass or glass-foil modules, bifacial solar modules, mono- or multicrystalline also PERC types, thin-film modules

Highest test quality
The flasher contains an A+A+A+ LED sun simulator of the latest generation with a light source tested by TÜV Rheinland and constructed in accordance with IEC 60904-9 Ed.3. The 13 different LED types achieve a very good image of the solar spectrum. The extension of the spectrum, especially in the UV and IR range, allows precise measurement of a wide variety of module types, including thin-film, PERC and HJT modules.
The flasher includes a high-resolution electroluminescence inspection with up to 30 MPixel resolution.
Hidden defects, such as microcracks or inactive areas, can be quickly and reliably detected directly on site. An electrical connection test before the measurement is also included.
The measurement results are automatically saved in the proven MBJ software with database on a 17-inch notebook. The evaluation of the measurements and the EL image can thus be done directly on site or later on your screen. After the panel measurements you will receive a comprehensive test report with statistical analysis in PDF format. .
Get in touch with us
We test your solar modules! Get a quote for a flash test at your premises now.
Technical details Flasher
sun simulator:
- full spectrum LED flash unit with long pulse
- TÜV-Rheinland certified LED light source (IEC 60904-9 Ed.3)
- spectrum Class A+ (IEC 60904-9 Ed.3, spectral match 300nm-1200nm)
- long-term instability (LTI) < +/- 1% Class A+ (IEC 60904-9 Ed.3)
- homogeneity inaccuracy < +/- 1% Class A+ (IEC 60904-9 Ed.3)
- reproducibility of Pmax, flash to flash < +/- 0.2% (absolute)
- sampling 16 bit / 50 kHz fully synchronous / configurable IV data recording time
electroluminescence test:
- CMOS cameras with a total resolution of up to 30 MPixel
- power supply with up to 250 V and 12 A
- fully automatic image acquisition <5 seconds
- manual EL image evaluation


Discover the revolutionary LED technology of our sun simulators! Unlike conventional xenon technology, our LED technology solves a variety of known problems. Our LEDs offer an impressive usable pulse duration of up to 180 ms and exceptional stability of the light flash.
With our LED-based solar simulators, we guarantee you outstanding reproducibility of results. Every test is precise and reliable, so you have access to accurate and reliable data. In addition, our solar simulators offer a perfect solution for new panel concepts such as bifacial panels or PERC panels.
Detect defects with flash tests
Flash tests check the performance of your solar modules. They provide indications of defective panels. Get a quote for your flash test.
From our practice: Example flash test
Our client has commissioned us to test modules that are optically completely flawless after storm damage. Our flash test revealed massive damage to the module's structure as well as a performance drop of up to 17%. You can see this in the following images:









Questions & answers about solar modules and tests
Do you still have questions about solar modules in general or testing solar modules in particular? In our solar-FAQ you will find answers to frequently asked questions about flash tests, checking and testing solar modules. We also explain in detail how ground-mounted solar modules differ from solar modules on roofs. If you have any further questions, please do not hesitate to contact us.
The flash test is a procedure for testing the performance and efficiency of solar modules. A brief, intense flash of light is directed at the modules in order to measure the current-voltage characteristics and thus determine the performance of the modules under standard conditions.
The flash test can be used for a wide range of solar modules, including monocrystalline, polycrystalline and thin-film modules. This test method is suitable for determining performance and efficiency regardless of the module technology.
Minimum module size (W x L in mm): 800 x 890 mm
Maximum module size (W x L in mm): 1400 x 2750 mm
We come to you anywhere in Europe - whether to your warehouse, logistics centre, solar park in the field, roof system or similar. We are happy to work on an uncomplicated basis with a daily flat rate of € 2,500.00 plus VAT and travelling expenses from Elmenhorst.
Framed and frameless glass-glass or glass-foil modules, bifacial solar modules, monocrystalline or multicrystalline modules (including PERC types), thin-film modules
Of course, you can also send us the modules for testing. In this case, it is important to note that the customer is responsible for transporting the modules there and back and for unloading and recharging them. We test the delivered modules and charge €16.00 per module plus VAT and a flat rate for unpacking and packaging.
Yes, our XXL-Mobile Lab 5.0 from the German manufacturer MBJ combines a TÜV-certified IEC 60904-9 Ed.3 A+A+A+ long-pulse LED sun simulator with a high-resolution electroluminescence test in a very compact system.
Before the tests, the modules to be tested are selected and made available for the tests. The modules should be unpacked beforehand and the packaging material removed or cleaned. During the test, at least two motivated and qualified helpers must be on site in addition to our team to support us in handling the test modules.
Our team requires a 230 volt power connection in the immediate vicinity of the test location. If this is not possible, please let us know so that we have an alternative on board. It is important that we have a safe and suitable environment for our mobile test laboratory.
Solar modules can be visually inspected for external damage such as cracks or fractures. In addition, power and voltage measurements as well as flash tests can be carried out to ensure that the modules are producing the expected energy.
Solar modules usually need to be replaced when their performance decreases significantly, which is normally the case after around 25 to 30 years. Another reason for replacement can be serious damage that impairs the functionality of the modules.
Solar modules lose power over time due to natural wear and tear, ageing and exposure to environmental influences. In addition, dirt, microcracks, delamination or hotspots can occur on the modules, which also leads to a loss of performance.
The performance of solar modules can be monitored and checked by carrying out electrical tests such as flash tests and thermal camera inspections. In addition, regular monitoring of the energy yield compared to the expected values is an important indicator of the modules' performance.
It is recommended that solar installations are thoroughly inspected and checked at least once a year to ensure that they are working properly. In regions with extreme weather conditions or heavy soiling, more frequent inspections may be necessary, for example every six months.
Damage to solar modules can be caused by various factors, including environmental stresses such as hail, storms and UV radiation. Mechanical influences, soiling, microcracks, hotspots or defects in the module construction can also lead to damage.
Testing on solar panels can identify various defects and problems, including cracks in the glass, delamination (detachment of layers), microcracks, hotspots (local overheating), discolouration and dirt deposits. In addition, electrical tests can reveal deviations in performance and possible interruptions in the cabling.
Write to us!
We look forward to meeting you.
We would be happy to provide you with a customized quote.