The be-all and end-all for your solar system

Efficiency and efficiency of solar modules

Typical values and influencing factors

What is efficiency? What is efficiency? We explain the significance of both parameters for solar modules: The efficiency of solar modules refers to the ratio between the electrical energy generated by the modules and the amount of irradiated sunlight that hits the modules. In other words, the efficiency. indicates how efficiently the solar modules can convert sunlight into electrical energy. It is expressed as a percentage and shows what proportion of the irradiated solar energy is actually converted into electricity.

A higher efficiency means that the modules can extract more energy from the available sunlight, resulting in a more efficient use solar energy Solar module efficiencies vary depending on the module type and technology, with more modern modules tending to have a higher efficiency. High efficiency is an important factor in maximising the profitability and performance of a solar installation.

When the efficiency weakens ...

... consider repowering your solar installation.

Typical efficiencies of solar modules (guide values)

The efficiency of solar modules can vary depending on the technology and manufacturer. In general, the typical efficiencies of solar modules for different module types are as follows:

  • Monocrystalline silicon modules: These generally have an efficiency of around 15% to 22%, although the best models can even achieve up to 24% or more.
  • Polycrystalline silicon modules: These typically have a slightly lower efficiency and are in the range of around 13% to 18%.
  • Thin-film modules: These generally have lower efficiencies compared to crystalline modules and can be between 10% and 12%.

Repowering for a better efficiency level

We give your solar system new power!

Factors influencing the efficiency of solar modules

The efficiency of solar modules depends on many factors. For example, the use of high-quality solar modules with advanced technology leads to more efficient energy generation. The orientation of the modules towards the sun and the correct inclination according to the location are also crucial for good efficiency.

A regular cleaning of the modules to remove dirt, dust and deposits increases the light absorption. In addition, the use of high-quality inverters that efficiently convert the direct current from the modules into alternating current helps to increase efficiency.

Shading (e.g. from trees and buildings), soiling, ageing, high temperatures and electrical losses have a negative effect. The efficiency of solar modules can deteriorate over time depending on the influencing factors mentioned. The current performance of modules an be determined and evaluated using flash testincluding a flash test.

Scroll to Top